DIY Beeswax Lip Balm Kit: A Step-by-Step Tutorial

What the kit gives you—and what it doesn't

The Kikkerland DIY Beeswax Lip Balm Kit is a measured-ingredient starter set. It includes 5g of 100% cold-pressed shea butter, 5g of 100% virgin coconut oil, and 5g of 100% pure beeswax, plus two lip balm tubes, a wooden stick, a mini funnel, and two stickers. That is enough material to make two tubes of lip balm from scratch.

What the kit does not include is a heat source, a melting vessel, or printed instructions. The supplied product information does not specify a melting method, temperature, or exact mixing order. Treat the steps below as a practical framework for working with these ingredients, not as a manufacturer's procedure. If you want a specific recipe ratio or safety guidance, check the packaging or contact the brand before you start.

Kit contents at a glance

• DIY Beeswax Lip Balm Kit: Includes 2x lip balm tubes, 1x wooden stick, 1x mini funnel, 2x stickers, 5g 100% cold-pressed shea butter, 5g 100% virgin coconut oil, and 5g 100% pure beeswax. Knowing the exact quantities helps you plan for two finished tubes and decide whether you need extra containers for a larger batch.

  

How to make beeswax lip balm with this kit

These steps assume you are melting the three supplied ingredients together. Because the kit does not include a recipe card, use a gentle double-boiler setup and keep the heat low. Never melt wax directly over an open flame.

1. Set up a gentle double boiler: Bring a small pot of water to a simmer, then place a heatproof bowl or a clean melting cup over the water. The bowl should not touch the water. Keep the heat low so the wax melts slowly.
2. Add the beeswax first: Beeswax has the highest melting point of the three ingredients, so give it a head start. Add the 5g of pure beeswax to the bowl and stir with the wooden stick until it is fully liquid.
3. Stir in the shea butter and coconut oil: Once the wax is melted, add the 5g of cold-pressed shea butter and 5g of virgin coconut oil. Stir gently until both are completely incorporated and the mixture is clear, with no visible lumps.
4. Pour through the mini funnel: Stand the two lip balm tubes upright. Place the mini funnel in the first tube and pour the melted mixture slowly. Leave a small gap at the top so the balm can settle as it cools. Repeat for the second tube.
5. Cool undisturbed: Let the tubes sit at room temperature until the balm is fully solid. Avoid moving them while they cool, because jostling can create cracks or a sunken center. Once set, seal the tubes and add a sticker to each.

Checkpoints before you pour

The kit gives you limited ingredients, so a little preparation prevents waste. Run through these checks before the wax melts.

• Tubes are clean and upright: Any water inside the tubes can cause the balm to spoil or separate. Dry them thoroughly and stand them on a flat, heat-safe surface.
• The mixture is uniform: If you see streaks of oil or specks of unmelted wax, keep stirring over low heat. A uniform melt gives a smoother finished balm.
• You have a resting spot: Choose a cool, level place where the tubes can sit undisturbed for an hour or more. Do not rush the cooling step in the refrigerator unless the product packaging says otherwise.

Turning the kit into a diy lip balm gift idea

Two finished tubes make a simple, homemade gift. The kit already includes two stickers, so you can label each tube by scent or recipient. Pair the balm with a small card explaining the ingredients—shea butter, coconut oil, and beeswax—so the recipient knows what they are using.

If you want to give both tubes away, keep the wooden stick and funnel for your next batch. The kit does not include extra ingredients, so you will need to source more shea butter, coconut oil, and beeswax if you plan to make a second round.

What to know before you buy

This kit is best for someone who wants a small, low-commitment project and does not mind supplying their own melting setup. The 5g portions are enough for two tubes, which makes it a reasonable trial size rather than a bulk recipe.

Because the supplied information does not include a full recipe or safety instructions, this is not the kit for someone who wants a complete, guided formulation. If you need exact temperatures, ratios, or preservation guidance, look for a kit that includes a printed recipe card. For a simple first attempt at homemade lip balm, the measured ingredients and basic tools here cover the essentials.